Lsy Series Cement Screw Conveyor for Cement Plant is specially used to conveying powder, bulk material, and small size particle with good flowing ability. Lsy Series Cement Screw Conveyor for Cement Plant consists of motor, motor base, U-type casing, spiral shaft, spline, suspension bearing, feed and discharge point.
Adopt motor as its power source, the spiral shaft is connected with motor directly to avoid energy lossing. Once the motor runs, it generates large running torque, then transmit it to spiral shaft. The material which filled in casing will move along the rotation of spiral shaft. And then discharged in outlet point smoothly.
Feature
1) Simple structure, small cross section size, low cost
2) Convenient to load and unload
3) Simple operation and convenient maintenance
4)adopt high-quality carbon steel or stainless steel as its casing, which thickness defined by customer.
5)each section connect with spline and suspesion bearing, the bearing with reliable leak tightness, good lubrication.
Application
Lsy Series Cement Screw Conveyor for Cement Plant may be used for branches such as chemical industry, building material, machinery, coal, metallurgy, light industry, grain, medicine, traffic, water and electricity broadly, Being used to transport all kinds of form of powder and small piece material. Be inadvisable to transport the big viscidity packing material or large piece of material easy to go bad. This enables the installation slightly tilted, the maximum tilt angle: Less than or equal 20 ° , the working environment temperature: -20 ° C ~ 50 ° C temperature materials transportation: Less than 200 ° C.
Service:
Conveyor selection and design facility.
Complete in-house engineering capabilities.
Solid Works drawing programme
In-house factory acceptance testing.
Full documentation and certification packages.
ATEX approval.
Crating and freighting facility world wide.
Model | Length | Speed | Diameter | Angle | Capacity | Model | Power |
LSY 140 | 3-5m | 300 r/min | φ 168mm | ≤ 60° | 10-15 t/h | Y132S-4 | 5.5 kw |
LSY 160 | 3-13m | 300 r/min | φ 194mm | ≤ 60° | 28-40 t/h | Y132S-4 | 7.5 kw |
LSY 200 | 3-15m | 260 r/min | φ 219mm | ≤ 60° | 38-58 t/h | Y132S-4 | 7.5 kw |
LSY 250 | 4-15m | 200 r/min | φ 273mm | ≤ 60° | 55-80 t/h | Y160S-6 | 11 kw |
LSY 300 | 6-15m | 175 r/min | φ 325mm | ≤ 55° | 80-110 t/h | Y180MS-4 | 18.5 kw |
LSY 400 | 6-12m | 175 r/min | φ 402mm | ≤ 55° | 110-140 t/h | Y180M-4 | 18.5 kw |