Industrial Bucket Elevator Conveyor
TD bucket elevator uses centrifugal unloading method or compound unloading method. It applies to conveying abrasion resistant or half abrasion resistant materials, such as powder, granule, small block, but the material temperature must be less than 60ºC. When material temperature is between 60~200ºC, it must use heat resistant rubber belt. Hoisting height can be 4~40m and conveying capacity is 4~238m³/h. TD bucket elevator is widely used in coal, cement, gravel, sand, fertilizer and grain, etc.
Structure
TD bucket elevator is comprised of running parts, hopper, transfer belt, drive roller, tension roller, intermediate shell, drive equipment etc.
Product features
| Large conveyor capacity |
| High lifting height |
| Running steadily and reliably |
| Long service life |
| Small drive power |
| Inflow feeding |
| Induction unloading |
| Sound seal and little circumstance pollution |
| Little machinery abrasion |
Application
High quality vertical belt type bucket elevator/conveyor/lifting machine is used for transferring the materials in form of powder, granular, small block non-abrasive, half-abrasive with bulk density less than 1.5t/m3, such as coal, cement, gravel, sand, fertilizer and grain etc.
Working Principle
While it is energized, the driving device drives pulley to make the bucket belt doing the circular motion from bottom to up.
The bucket is filled with material and is conveyed to the head terminal, and then the material is thrown from the outlet under the action of centrifugal force according to the Parabolic design.After discharging, the empty bucket is back to the boot by conveying and be filled again, and then lifted up to do parabolic motion such repeated cycle.The material is lifted from bottom to the top to the specified height to reach conveying vertically.
Technical performance and parameters
| Model |
TD160 |
TD250 |
TD315 |
TD400 |
| Bucket type |
Q |
H |
Zd |
Sd |
Q |
H |
Zd |
Sd |
Q |
H |
Zd |
Sd |
Q |
H |
Zd |
Sd |
| Capacity (m3/h) |
9 |
16 |
16 |
27 |
20 |
36 |
38 |
59 |
28 |
50 |
42 |
67 |
40 |
76 |
68 |
110 |
| Bucket width(mm) |
160 |
250 |
315 |
400 |
| Bucket volume(L) |
0.5 |
0.9 |
4.2 |
1.9 |
1.3 |
2.2 |
3 |
4.6 |
2 |
3.6 |
3.8 |
5.8 |
3.1 |
5.6 |
5.9 |
9.4 |
| Belt Width (mm) |
200 |
300 |
400 |
500 |
| Model |
TD500 |
TD630 |
| Bucket type |
Q |
H |
Zd |
Sd |
Q |
H |
Zd |
Sd |
| Capacity (m3/h) |
63 |
116 |
96 |
154 |
_ |
142 |
148 |
238 |
| Bucket width(mm) |
500 |
|
| Bucket volume(L) |
4.84 |
9 |
9.3 |
14.9 |
_ |
14 |
14.6 |
23.5 |
| Belt Width (mm) |
600 |
700 |
Note: the parameter above is just for reference,it can be customized by different requirment.
){kind=link}