Screw Conveyor, Conveyor, Conveying Machine manufacturer / supplier in China, offering Pipe Screw Conveyor System Conveyor, High-Precision Circular Rotary Vibrating Sieve Screen, Mining Machine China Chain Flexible Cement Bucket Elevator and so on.
|Min. Order / Reference FOB Price||1 Piece||US $1,500/ Piece|
|Production Capacity:||100 PCS/Year|
|Payment Terms:||L/C, T/T, D/P, Western Union, Paypal, Money Gram|
|Material Feature:||Heat Resistant|
|Certification:||ISO9001:2008, ISO9001:2000, CE|
|Energy Saving:||Energy Saving|
|Model||Screw Diameter||Screw Rotation Speed||Inclination Angle||Conveyor Length|
20, 30, 35, 45, 60,
75, 90, 120, 150, 190
1.Simple structure, good sealing, large capacity, long service life.
2.Convenient installation and maintenance, as well as easy operation.
3.Working temperature is -20~50ºC, with material temperature below 200 ºC.
4.Suitable for horizontal and slightly inclined transport of powdery, granular and small lump materials, such as coal, ash, clinker, cement, grain, etc.
5.Widely used in construction, chemical, power, metallurgy, coal and grain industries, etc.
1.It can be sealed to prevent the escape of dust or fumes from inside the conveyor; or prevent dust contamination from outside the conveyor.
2.It can be used to control the flow of material in processing operations which depend upon accurate batching
3.It can be utilized in the horizontal, vertical or any inclined position depending upon the characteristics of the product being conveyed.
4.It can be used as a mixer or agitator to blend dry or fluid ingredients, provide crystallization or coagulant action, or maintain solutions in suspension.
5.Screw conveyors can have multiple conveyor outlets, making discharge to multiple outlets cost effective.
6.It can be jacketed to serve as a drier or cooler by running hot or cold water through the jacket.
7.It can be made out of a variety of materials to resist corrosion, abrasion or heat, depending upon the product being conveyed.
8.It can be outfitted with multiple inlet and discharge points.
Routine periodic inspection of the entire conveyor must be established to ensure continuous maximum operating performance. Keep the area around the conveyor and its drive clean and free of obstacles to provide easy access and avoid functional interference of components.
2.Power Lock Out
Lock out power to the motor before attempting any maintenance. Use a padlock and tag on the drive's controls. Do not remove padlock or tag, nor operate conveyor, until all covers and guards are securely in place.
3.Removing Screw Sections
Screw sections are typically removed starting with the end opposite the drive when necessary. Remove trough end, screw sections, coupling shafts, and hangers until damaged or worn section is removed. Reassemble conveyor in reverse order.
Periodically remove and inspect one of the drive shaft coupling bolts for damage or wear. Also inspect the coupling bolt hole. The drive shaft coupling bolts transmit more power than successive coupling bolts and will typically indicate the greatest wear. An accurate torque wrench should always be used when tightening coupling bolts. Excessive torque will stretch the bolt and significantly compromise its strength.
Lubricate end bearings, hanger bearings and drive components at the frequency and quantity specified by the individual component's manufacturer. Most types of hanger bearings require lubrication and wear is reduced significantly with a frequent lubrication schedule. Frequency of schedule depends on temperature, type of bearings, type of lubrication, product conveyed, trough load, screw weight, etc.)
6.Screw Bushings/Internal Collars
The bushing at each end of a screw will wear over time. When possible, check for excessive shaft movement that indicates bushings need to be replaced. Longer and heavier screws typically have greater bushing wear.