Professional Large angle corrugated sidewall belt conveyor
Professional Large angle corrugated sidewall belt conveyor is continuous transporting equipment of loose bulk materials such as coke, coal, limestone, sand and gravel. It adopts high quality conveyor belt with corrugated sidewall and horizontal baffle. Sidewall belts are used to convey material up inclines. The sidewall increases the carrying capacity of the belt and prevents product from falling off the edges of the belt. Hot vulcanization provides a 5x greater adhesion between the belt and sidewall, eliminating the need for bolting the sidewall to the base belt. Greater adhesion also prevents the sidewall from lifting and separating from the base belt, extending the belt life.
Coal and wood-chip fired power stations
Underground mining (coal and ore)
Shaft conveying for tunnelling and underground mining
Ship loading and unloading, ship to ship loading
Sand preparation in foundry plants
Slope conveying in openpit mining
Waste recycling, soil purification and water treatment
Handling of large material flows in the horizontal path
Flexible transportation - can convey all kinds of bulk materials such as coal, ore, sand, fertilizer and grain in horizontal, oblique, vertical or other angle directions.
High tensile strength
Increases belt capacity
No spillage with steep angle conveying
Decrease necessary conveyor footprint
No transfer points- the belt are capable of turning at any angle right from feed hopper to discharge point
Maximum utilization of space - able to convey material at angles up to 90 degree
Decrease maintenance costs with fewer drive units and components
Low power requirement - requiring low power to move loaded belts
Quiet smooth running - as belt runs on rotating idlers, low resistance is achieved that in turn ensures quieter operations
The horizontal loading section a deflection wheel bends the belt into the feeding of the bulk material takes place on a mostly horizontal feed path, where the side wall belt is supported by loading impact idlers. The feeding of the conveyed material can be achieved by direct feeding from a hopper, over a chute, a feeding belt or a feeding pulley. The selection of the optimum feeding station depends on the properties of the bulk material and the belt speed of the vertical conveyor. The upward and downward strands are encased from the bottom to the top. Substructures or support rollers are not necessary in this section.
The vertical section leads over a deflection curve into the horizontal discharge section. The deflection curve is made up of a number of high specification pulleys. These pulleys experience the vectored load of deflecting the belt tension from vertical to horizontal.
At the drive pulley, the bulk material is discharged and the belt is returned to the back going strand. Depending on the bulk material properties, the drive pulley is followed by a beater wheel for belt cleaning in the return side. The beater is self-driven. Material that fails from the belt goes into the main delivery chute. Lateral deflection wheels turn the belt from the horizontal back to the vertical.