Pipe Screw Conveyor System Gx400
|FOB Price:||US $1,500 / Piece|
|Min. Order:||1 Piece|
|Min. Order||FOB Price|
|1 Piece||US $1,500/ Piece|
|Production Capacity:||100 PCS/Year|
|Transport Package:||as Customers′ Requirements|
- Model NO.: GX400
- Structure: Conveyor System
- Material Feature: Heat Resistant
- Energy Saving: Energy Saving
- Color: Customized
- Condition: New
- Screw Pitch: 400mm
- Capacity: 51 M3/H
- Conveyor Length: 3~70m
- Producing Area: China
- Features: Widely Used in Construction, Chemical, Power, Meta
- Specification: ISO9001: 2000/ CE
- HS Code: 84283990
- Type: Screw Conveyor
- Material: Stainless Steel
- Certification: BV, ISO9001:2008, ISO9001:2000, CE
- Warranty: 1 Year
- Customized: Customized
- Screw Diameter: 400mm
- Rotating Speed: 60rpm
- Inclination Angle: < 20 Degree
- Working Temperature: -20~50 Degree
- Materials: Coal, Ash, Slag, Cement, Food, etc.
- Trademark: PK
- Origin: Henan, China (Mainland)
GX tubular screw conveyor is bulk material handling equipment, which usually consists of a tube containing either a spiral blade coiled around a shaft (sometimes called an auger), driven at one end and held at the other. The main parts include tube, shaft with spiral blades, inlet and outlet chutes, as well as driving device.
|Model||Screw Diameter||Screw Rotation Speed||Inclination Angle||Conveyor Length|
20, 30, 35, 45, 60,
75, 90, 120, 150, 190
The screw conveyor consists of power device, gear box, coupling, screw axis and hanging bearing. The screw axis is made of several sections which connected with spline. Hence, the conveyor hold large load capacity and convenient to dismounting. It is open a besel on the casing to ensure a safe operation.
1.Simple structure, good sealing, large capacity, long service life.
2.Convenient installation and maintenance, as well as easy operation.
3.Working temperature is -20~50ºC, with material temperature below 200 ºC.
4.Suitable for horizontal and slightly inclined transport of powdery, granular and small lump materials, such as coal, ash, clinker, cement, grain, etc.
5.Widely used in construction, chemical, power, metallurgy, coal and grain industries, etc.
1.It can be sealed to prevent the escape of dust or fumes from inside the conveyor; or prevent dust contamination from outside the conveyor.
2.It can be used to control the flow of material in processing operations which depend upon accurate batching
3.It can be utilized in the horizontal, vertical or any inclined position depending upon the characteristics of the product being conveyed.
4.It can be used as a mixer or agitator to blend dry or fluid ingredients, provide crystallization or coagulant action, or maintain solutions in suspension.
5.Screw conveyors can have multiple conveyor outlets, making discharge to multiple outlets cost effective.
6.It can be jacketed to serve as a drier or cooler by running hot or cold water through the jacket.
7.It can be made out of a variety of materials to resist corrosion, abrasion or heat, depending upon the product being conveyed.
8.It can be outfitted with multiple inlet and discharge points.
Routine periodic inspection of the entire conveyor must be established to ensure continuous maximum operating performance. Keep the area around the conveyor and its drive clean and free of obstacles to provide easy access and avoid functional interference of components.
2.Power Lock Out
Lock out power to the motor before attempting any maintenance. Use a padlock and tag on the drive's controls. Do not remove padlock or tag, nor operate conveyor, until all covers and guards are securely in place.
3.Removing Screw Sections
Screw sections are typically removed starting with the end opposite the drive when necessary. Remove trough end, screw sections, coupling shafts, and hangers until damaged or worn section is removed. Reassemble conveyor in reverse order.
Periodically remove and inspect one of the drive shaft coupling bolts for damage or wear. Also inspect the coupling bolt hole. The drive shaft coupling bolts transmit more power than successive coupling bolts and will typically indicate the greatest wear. An accurate torque wrench should always be used when tightening coupling bolts. Excessive torque will stretch the bolt and significantly compromise its strength.
Lubricate end bearings, hanger bearings and drive components at the frequency and quantity specified by the individual component's manufacturer. Most types of hanger bearings require lubrication and wear is reduced significantly with a frequent lubrication schedule. Frequency of schedule depends on temperature, type of bearings, type of lubrication, product conveyed, trough load, screw weight, etc.)
6.Screw Bushings/Internal Collars
The bushing at each end of a screw will wear over time. When possible, check for excessive shaft movement that indicates bushings need to be replaced. Longer and heavier screws typically have greater bushing wear.
Selection condition :
Primary considerations for the selection of a screw conveyor are as follow:
1.Type and condition of the materials to be handled, including maximum particle size, and, if available, the specific bulk density of the material to be conveyed.
2.Quantity of transported material, expressed in pounds or tons per hour.
3.The distance for which the material is to be conveyed.
Below is the necessary information for the selection of a screw conveyor system, presented in a series of five steps. These steps are arranged in logical order, and are divided into separate sections for simplicity.
The five steps are:
1.Establishing the characteristics of the material to be conveyed.
2.Locating conveyor capacity (conveyor size and speed) on capacity tables.
3.Selection of conveyor components.
4.Calculation of required horsepower.
5.Checking of components torque capacities (including selection of shaft types and sizes)