Large Angle Sidewall Belt Conveyor For Food Factory With ISO From China
| Structures |
DJ steeply inclined belt conveyor is for material steeply conveying, comprising an endless corrugated sidewall conveyor belt, guide rollers around which the conveyor belt passes to define a conveying portion and a returning portion of the belt, spaced support idlers for supporting the returning portion of the conveyor belt, and a series of cross cleat on the conveyor surface for engaging material carried by the conveying portion of the belt to prevent conveyed materials from sliding down the conveyor belt on the incline. |
| Application |
This machine is a continuously conveying equipment for loose bulk material such as coal, sand, stone, grain, etc and some powdered material, so its slope of application is very wide, including mine, cement plant, chemical industry, metallurgy and agriculture, electric power, light industry, grain, port, shipping ect, when the mateial need to be conveyor at a big inclined angle, the steeply inclinded belt conveyor also could conveying material vertically. |
| Specific gravity of bulk materials is 0.5-2.5 t/m³ Can be conveyed in the working environment where the temperature is during -15 degree to 140 degree. |
| Advantages |
Using steeply inclined conveyor to convey loose bulk materials which can save a lots of spaces and lift material at the same time that ordinary belt conveyor can not reach |
| Big conveying capacity, it can reach 1800 cubic meters per hour |
| When vertically conveying materials, the biggest materials granularity is 350 mm |
| It can transit stably from level to inclination |
| Low energy consumption, easy construction and convenient maintenance |
| High adhesive tape strength and long life |
| Technical Parameter |
Belt width
(mm) |
Height of sidewall
(mm) |
Capacity
Qv(m³ /h) |
Max materials size (mm) |
Speed scope (m/s) |
Angle of inclination(° ) |
| 500 |
80 |
11-84 |
50 |
0.8-2.5 |
30-90 |
| 100 |
55 |
| 120 |
60 |
| 650 |
100 |
23-180 |
55 |
| 120 |
60 |
| 160 |
80 |
| 800 |
120 |
36-280 |
60 |
| 160 |
80 |
| 200 |
100 |
| 1000 |
160 |
45-500 |
80 |
| 200 |
100 |
| 240 |
140 |
| 1200 |
160 |
57-800 |
80 |
| 200 |
100 |
| 240 |
140 |
| 300 |
180 |
| 1400 |
200 |
73-1000 |
100 |
| 240 |
140 |
| 300 |
180 |
| 400 |
250 |
| Selection condition |
What is the conveying material and its physical characteristics? such as bulk density, feeding size, temperature, mositure content etc. |
| What is the processing capacity of the conveyor? |
| What is the inclination angle of the conveyor? |
| What is the lifting height (distance between inlet and outlet)? |
| What is the length of horizontal section? |
| Maintenance |
| Idlers |
These must rotate freely, and be free from any material build-up. Lubrication of all moving parts on a planned basis is essential for dependable operation and minimum maintenance. Component life will be extended by following the manufacturer lubrication instructions. |
| Pulleys |
These should be free from any material build-up. The lagging on the drive pulley should be inspected on a regular basis. If the lagging is in poor condition it may be necessary to apply more tension than is normally necessary to drive the belt resulting in premature wear. |
| Deflection Gear |
Again, these must be free to rotate freely. |
| Feed Hopper |
It is important that this is just free from the top of Sidewalls, any rubber seals around the hopper need checking for wear to prevent excessive dust or spillage. |
| Tracking |
The belt should run without touching any side members or deflection gear, please refer to the section on belt tracking if the belt is running out of alignment. |
| Good housekeeping |
This is necessary for continuous operation and low maintenance. Spillage and build-up of material can eventually cause the idlers to stop rotating and an accumulation of lumpy material can cause belt damage. |
Check: The belt edges, Sidewalls, Cleats and the belt splice need to be checked on a periodic basis for wear or separation. Any minor areas of damage should be repaired as soon as is possible.
Please contact us freely if you have any questions.
Audited Supplier 
Audited Supplier 
){kind=link}
){kind=link}